Debris Netting and Safety Netting Systems
Slab-edge debris netting, fall-protection-rated personnel safety netting, and custom netting that keeps materials, workers, and the public below protected. Made in the USA. Same-day quotes.
Stop Falling Debris at the Slab Edge
Tools, fasteners, and building materials that fall from upper floors put crews, neighbors, and sidewalks at risk. ATI Construction Products supplies two netting systems that clamp straight onto the slab: the DS-1320 for falling debris and the RB-412 for personnel fall protection, plus custom netting when a standard system doesn't fit.
- Patent-pending slab bracket fits decks from 4" to 22" deep
- Quick adjustment with an impact wrench
- DS-1320 meets ANSI A10.37 for falling debris
- RB-412 is rated for fall protection: OSHA 1926 and ANSI A10.11-2016
- Galvanized for durability and made in the USA
- Same-day quotes and nationwide shipping from Arvada, Colorado
Two Netting Systems, One Slab Bracket
DS-1320 Debris Netting System
A galvanized steel debris system that installs at the working level and catches material falling from the levels above. The adjustable arm extends 13 feet from the slab edge, and the patent-pending bracket clamps on with superior force.
| Arm extension | 13′ 0″ from the slab edge |
|---|---|
| Slab depth | Decks 4″ to 22″ deep |
| Weight | 86 lbs |
| Tube material | A-36, 10-gauge steel (2.5″ outer tube, 2″ inner tube) |
| Support | 3/8″ cable with turnbuckle |
| Finish | Galvanized, grey |
| Standard | ANSI A10.37 |
| Made in | USA |
Not rated for fall protection. The DS-1320 is designed for falling debris. To protect workers from falls, use the RB-412 Personnel Safety Netting.
RB-412 PSN Personnel Safety Netting System
Designed to protect your workers, adjacent properties, and the general public when working at height. High-tensile synthetic diamond mesh nets are built for the most demanding construction conditions, and the system is available to rent or buy. For the OSHA scaffold rules that go with it, see what owning scaffolding means under OSHA.
| Pole extension | 20′ 0″ |
|---|---|
| Slab depth | Decks 4″ to 22″ deep |
| Weight | 105 lbs |
| Tube material | 6061-T aluminum |
| Nets | High-tensile synthetic diamond mesh |
| Finish | Galvanized grey |
| Standards | OSHA 1926 and ANSI A10.11-2016 |
| Rent or buy | Rental and purchase options available |
| Made in | USA |
DS-1320 vs. RB-412 at a Glance
| Feature | DS-1320 Debris Netting | RB-412 Safety Netting |
|---|---|---|
| Main job | Catches debris falling from upper levels | Protects workers, neighbors, and the public when working at height |
| Rated for fall protection | No | Yes |
| Standards | ANSI A10.37 | OSHA 1926, ANSI A10.11-2016 |
| Reach | 13′ 0″ arm | 20′ 0″ pole |
| Material | Galvanized A-36, 10-gauge steel | 6061-T aluminum, galvanized grey |
| Weight | 86 lbs | 105 lbs |
| Slab depth | 4″ to 22″ | 4″ to 22″ |
| Rent or buy | Call for options | Rent or buy |
Not sure? Call (800) 360-6115 with your building height, slab depth, and what's below the work area, and we'll recommend the right setup.
Easy to Install at the Working Level
Clamp to the slab
The patent-pending slab bracket fits over the deck edge, on decks from 4″ to 22″ deep.
Tighten with an impact wrench
Adjust the bracket to the right width with an impact wrench and secure it to the deck.
Extend the arm and hang the net
The arm extends up to 13 feet and is held by a 3/8″ support cable. The netting attaches at the eyenut on the end of the arm.
Full part list and diagrams: DS-1320 Installation Guide (PDF).
When a Standard System Doesn't Fit
Odd building shapes, tight sites, and demolition work often need something built to fit. ATI designs custom netting and supplies the sheeting and containment materials that go with it, along with scaffolding, access systems and fall protection.
Custom Design Netting Systems
Custom-engineered debris and containment netting, designed to your site's exact dimensions and load requirements, complementing our DS-1320 and RB-412 systems.
Construction Debris Netting
Netting for containment and demolition control, keeping dust and debris on your site and off neighboring properties.
Poly Sheeting and Tarps
Poly sheeting, vapor barriers, and tarps for construction and remediation containment.
Custom Cut Sheeting
Sheeting cut to the sizes your job needs, for dust and debris control.
Built for Sites Where Things Can Fall
High-Rise Construction
Slab-edge debris and safety netting on each working level as the building goes up.
Remodel and Renovation
Protect occupied buildings, entrances, and walkways below while work goes on overhead.
Demolition
Containment and debris control that keeps material inside the work zone.
Work Over Public Areas
Sidewalks, streets, and neighboring properties that need protection from falling objects.
Spec Sheets and Installation Guide
Debris and Safety Netting FAQ
Answers from ATI Construction Products.
What is the DS-1320 Debris Netting System?
The DS-1320 is a galvanized steel debris netting system from ATI Construction Products that installs at the working level, clamped to the edge of the slab. Its adjustable arm extends 13 feet from the slab edge to catch material falling from the levels above, and it is designed to meet ANSI A10.37.
Is the DS-1320 rated for fall protection?
No. The DS-1320 is built for falling debris and is not rated for fall protection. Where workers need protection from falls, use the RB-412 PSN Personnel Safety Netting System, which is rated for fall protection and compliant with OSHA 1926 and ANSI A10.11-2016.
What is the difference between debris netting and safety netting?
Debris netting catches tools, fasteners and materials that fall from upper levels, and it is not rated to catch a person. Personnel safety netting is rated for fall protection and is designed to catch workers who fall. ATI's DS-1320 is a debris netting system built to ANSI A10.37, and the RB-412 PSN is a personnel safety netting system that meets OSHA 1926 and ANSI A10.11-2016. Many high-rise jobs use both.
How far below the work surface can a safety net be installed?
Under OSHA 1926.502(c), a personnel safety net must be installed as close as practicable under the working surface and never more than 30 feet below it. It has to extend 8 to 13 feet out from the edge, depending on how far below the work it hangs, and be drop-tested with a 400-pound bag after it is installed. Call ATI at (800) 360-6115 to plan an RB-412 layout for your building.
What slab thicknesses do the netting brackets fit?
Both the DS-1320 and the RB-412 use a patent-pending slab bracket that fits decks from 4 to 22 inches deep. The bracket is adjusted to the slab and tightened with an impact wrench.
Can I rent safety netting, or do I have to buy it?
The RB-412 PSN Personnel Safety Netting System is available to rent or to buy. Call (800) 360-6115 for DS-1320 and custom netting options and pricing for your project.
Can ATI design netting for an unusual building or site?
Yes. ATI designs custom debris and containment netting systems to your site's exact dimensions and load requirements. They can work alongside the DS-1320 and RB-412 or on their own.
How fast can I get a quote, and do you ship?
ATI offers same-day quotes on most products and ships nationwide from Arvada, Colorado. Call (800) 360-6115 or send the online quote form.
Need Debris or Safety Netting?
Same-day quotes. Nationwide shipping. Call (800) 360-6115 or fill out the form.
